Receiver 100khz-1.7ghz Rtl2832u+r820t2 Rtl-sdr Band Software Aeronautical Radio Receivers Tv Full Sandra Reid Rating: 3.1 out of 5
This product is very unique, made with quality materials definitely long lasting for use in a long duration. Before you use it, make certain you read the overview thoroughly. Do not slip up when utilizing it. When using it, quality products guarantee your life extra comfy. If you are interested to get it, you could directly call the sales to obtain even more information regarding this high quality product.
WELCOME TO OUR SHOP 100KHz-1.7GHz Full Band Software Radio RTL-SDR Receiver RTL2832U+R820T2 Aeronautical Band TV ReceiversNote:
1.Due to the difference between different monitors,there are color differences,pls understand.
2.Please allow 1-3mm errors due to manual measurement.
3.This product can only receive FM radio and the nearby radio signal, can not receive shortwave. If you want to receive shortwave, you can buy matching antenna.
The receiver is now using the latest RTL2832U + R820T2 program, the use of RTL2832U on the Q channel, increasing the frequency of 100KHz-24MHz direct access. To achieve a full reception of 100KHz-1.7GHz.[R820T2 tuner has a slightly better sensitivity than the R820T, lower noise floor, higher signal to noise ratio. Can work more stably around the frequency of 1.5 GHz. To Can be connected to the computer, Andrews mobile phones and other equipment using SDR software, receive 100KHz-1.7GHz electromagnetic waves to support AM, FM (NFM, WFM), CW, DSB, LSB, USB demodulation. Can listen to shortwave single sideband communication, FM radio, walkie-talkie calls, aviation bands and so on.[Through software can crack analog yin, digital tone. To[You can set the automatic search scan. To[Can be used to crack the commonly used digital radio ID and demodulate the voice signal]
Direct RTL.SDR technical features.
Fully assembled and ready to use
Uses RTL2832U+R820T2 chip set
[the R820T2 tuner has slightly better sensitivity than the R820T and also works better at frequencies around 1.5 GHz.]
100KHz to 1766MHz, operating frequency
Covers all HF amateur bands
Covers VHF & UHF bands from 24-1766MHz
Up to 3.2 M Sample rate. (~2.8 MHz stable)
Receiver modes AM, NFM, FM, DSB, USB, LSB and CW
HF Shortwave Q branch direct sampling
Note: depends upon the SDR software used with the receiver
8-bit ADC giving ~50 dB dynamic range
50 Ohm input impedance
Double SMA golden antenna connectors
Aluminum enclosure screened panels
Small size board
Freeware software
Independent antenna inputs for Shortwave and VHF
USB computer connection ( mini usb) Powered by common USB
All specifications subject to change without notice
Receiving LF/MF/HF (0 - 30 MHz)
The antenna must be connected to the HF input port
signal receiving HF band needs to meet the HF Antennas such as Long
Wire, Random Wire, Dipole etc.. To have a good effect need
matching antenna.
The program of SDR # with RTL configured to direct sampling of the signal Q, as shown in the following figure
Operation on VHF and UP:
The antenna must be connected to the UV input port
By default the RTL-SDR’s gain is set to zero. Increase this gain
by moving the RF Gain slider up, or by turning on Tuner AGC.
ANTENNA CONNECTION
Direct sampling settings for HDSDR
click on the ExtIO button 
Receiving LF/MF/HF (0-30 MHz) Operation on VHF and UP:
No comments:
Post a Comment