Hdmi 7992dvb-t 2 Route Two Dvb-t Router Satlink Ws-7992 Modulator Flash Deal Dm Rf Hd Frida Velva Rating: 4.5 out of 5
Total perfect item!
Satlink WS-7992 2 Route DVB-T Modulator AV HDMI Two Router DM Modulator Satlink 7992 DVB-T HD Digital RF Modulator
Introduction：
- High level of integration, high-performance, Full-featured, integrated design
- 2 Route input modulator that converts analogue A/V source to a DVB-T channel
- Standard COFDM modulation and H.264 encoding
- Multiple video format compatibility including 576i(PAL) / 480i(NTSC) / 1080p
- Bandwidth: 6/7/8MHz
- Frequency Range: 50~860MHz
- Continuously adjustable RF signal output level range 70dBuV from 100dBuV, step 1dBuV
- 2.4 inch color LCD display
- Small size and light weight
- Carriers 2K and 8K
- User friendly setup and control
- Compact and wall mountable
- 1 x 7992 Modulator
- 1 x Power Adaptor
- 1 x Power Cable
- 1 x USB Cable
- 1 x User’s manual (CD)
Converts your Full-HD Video Signals into a standard HDTV RF channel and distribute to unlimited HD TVs via the antenna coax cable.
Satlink WS 7992 is the perfect HD Video distribution solution for any Home Entertainment system, connecting any Home-Video Master system to all the other TVs in each room without the need to duplicate the AV equipment.Specifications:
DVB-T Standard
HD Broadcast 1080i
Frequency range: 50 to 860 Mhz
RF Out Level: Adjustable from 70dBuV to 100dBuV
DVB-T modulations: QPSK, 16QAM, 64QAM
Channel Bandwidth: 6/7/8 Mhz
Carriers: 2K, 8K
Guard Intervals: 1/4, 1/8, 1/16, 1/32
Code Rates: 1/2, 2/3, 3/4, 5/6, 7/8
Impedance: 75 Ohm ( 50 opt. )
MER: 35 dB
Spectrum Shoulders: 55 dB for perfect adjacent-channel operations
Out Filter: -70 dB of Harmonic and spurious suppression
Encoding Delay 600-800 milliseconds
Video Input Formst: CVBS, HDMI
Encoding Format: H.264
Video Resolution: 576i PAL/ 480i NTSC/ 1080p
Connector: RCA/ HDMI 1.3
Audio Input Format: Stereo L/R channel
Connector: RCA
Power Source: DC 12V 1,5A
Operating Temperature: 0- +50°C
Dimensions: 280 x 203 x 61mm
Weight: 1.26KGPlease Note:
Signals from DVD for example or other devices with HDCP need additional option to be switched on if is not .
The option Service provider : HDCP in menu should be ON if is blank that mean is OFF.
To switch ON you need to restart the modulator from power then power ON,wait to load for few seconds and when output frequency is visible on the screen then press down and hold the Return button for 3 seconds . The operation is required every time when modulator is reset to factory settings .
Pakckage included:
Satlink WS-7992 Two routes dvb-t modulator x1
EU Power supply x1
user manual CD x1
Return Policy
If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service
On-time Delivery: If you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).Hdmi 7992dvb-t 2 Route Two Dvb-t Router Satlink Ws-7992 Modulator Flash Deal Dm Rf Hd
No comments:
Post a Comment